Click image to view full size image
Dx 850 Corrugated Galvanized Roofing Sheet Roll Forming Machine
photoes of Dx 850 Corrugated Galvanized Roofing Sheet Roll Forming Machine
2. Technique parameters
(1) Processing material: galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 850mm
(4) Feeding width: 1000mm
(5) Main motor power: 4 kw
(6) Pump power: 4 kw
(7) Speed: 8-12m/min
(8) Shaft diameter: 75mm
(9) Forming steps: 13 steps
(10) Roller material: 45# forged steel, with hard chrome plating
(11) Main frame: 300H steel
(12) Medium plate thickness: 14mm
(13) Control systerm: PLC computer control with inverter
(14) Power supply: 380V, 3 Phase, 50Hz
(15) 0veral sized: 6500mm*1500mm*1200mm
Equipment Components
Decoiler 1Unit
Feeding Guide 1 Unit
Roll Forming System: 1 Unit
Press&Cutting Device 1 Unit
Hydraulic Station 1 Unit
PLC control System 1 Unit
Runout Table 2Units
3.Payment term: 30%TT in advance,70% before the shipment.
4.Warranty: 12 month, and lifelong technician support.
More in formation and discount, please contact to me.
Contact: Bella Mobile +8618231723279
photoes of Dx 850 Corrugated Galvanized Roofing Sheet Roll Forming Machine
2. Technique parameters
(1) Processing material: galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 850mm
(4) Feeding width: 1000mm
(5) Main motor power: 4 kw
(6) Pump power: 4 kw
(7) Speed: 8-12m/min
(8) Shaft diameter: 75mm
(9) Forming steps: 13 steps
(10) Roller material: 45# forged steel, with hard chrome plating
(11) Main frame: 300H steel
(12) Medium plate thickness: 14mm
(13) Control systerm: PLC computer control with inverter
(14) Power supply: 380V, 3 Phase, 50Hz
(15) 0veral sized: 6500mm*1500mm*1200mm
Equipment Components
Decoiler 1Unit
Feeding Guide 1 Unit
Roll Forming System: 1 Unit
Press&Cutting Device 1 Unit
Hydraulic Station 1 Unit
PLC control System 1 Unit
Runout Table 2Units
| 1 | Coil width | 1000mm |
| 2 | Cover width | 850mm |
| 3 | Coil sheet thickness | 0.2-0.8mm |
| 4 | Material of frame | 300H steel |
| 5 | Diameter of shaft (solid shaft) | (high grade) 45# Steel |
| 6 | Diameter of shaft (solid shaft) | 75mm |
| 7 | Treatment of roller | quenched and tempered treatment, hard chromized coated 0.05-0.07mm |
| 8 | Thickness of middle plate | 14mm |
| 9 | Forming station | 13 stations |
| 10 | Drive type of roll forming machine | drive by chain(0.8 inch) |
| 11 | Power of main motor | 4KW |
| 12 | Motor power of hydraulic station | 4KW |
| 13 | Oil pump of hydraulic station | No.46 gear oil pump (high grade) |
| 14 | Forming speed | about 8-12 m/min |
| 15 | Voltage | 380V/50Hz/3phase |
| 16 | Hydraulic cutting | cutting controlled by PLC |
| 17 | Accuracy of cutting | +/- 1mm |
| 18 | Razor blades material | Cr12, quenching 58-62 ° |
| 19 | Electrically controlled system | entire machine controlled by PLC |
| 20 | PLC | DELTA(TAIWAN) |
| 21 | Weight of main forming machine | About 3 T |
3.Payment term: 30%TT in advance,70% before the shipment.
4.Warranty: 12 month, and lifelong technician support.
More in formation and discount, please contact to me.
Contact: Bella Mobile +8618231723279